Model A Lubrication Chart

EVERY 500 MILES    
Location Quantity Grease Fitting
Grease Gun    
1.     Upper Spindle Arm (Left Side/Right Side) 2 4
2.     Lower Spindle Arm (Left Side/Right Side) 2 5
3.     Brake Actuator Arm (Front Axle-L/R Side) 2 5
4.     Shock Link (Front/Rear-L/R Side) 4 2
5.     Spring Shackle (Front-L/R Side) 2 5
6.     Spring Shackle (Rear-L/R Side) 2 5
7.     Tie-Rod Ends 2 3
8.     Drag Link Ends 2 5
9.     Rear Axle Bearing (Rear-L/R Side) 2 3
10.   Rear Brake Actuator Arm (Rear-L/R Side, behind 2 5
Rear Radius Rod    
11.  U-Joint (Under U-Joint Housing, behind Trans.) 1 3
12.  Brake and Clutch Pedal Bushing 2 3
13.  Emergency Brake Cross Shaft (Outside Frame-L/R) 2 4
14.  Water Pump 2 3 & 1
Oil Can (Squirt, SAE 30)    
15.  Accelerator Control Shaft 2  
16.  Distributor 1  
17.  Starter Crank Hole 1  
Engine Oil (SAE 10W-30)    
18.  Crankcase (Oil Pan, 4-1/2 Qts. at Oil Change 5 Qts.  
3:1 Oil    
19.  Horn (Oil Twice Yearly) 2  
EVERY 1000 MILES    
20.  Generator (Oil Squirt-SAE 30) 2  
EVERY 2000 MILES    
Grease Gun    
21.  Throwout Bearing Slider 1 3
22.  Steering Sector Shaft (1928/1929) 1 3
600W Gear Oil    
23.  Steering Gear Box 1  
Vasoline    
24.  Distributor Cam 1  
EVERY 5000 MILES    
Bearing Grease    
25.  Front Wheel Bearings (Packed Bearing Grease) 4  
600W Gear Oil    
26.  Differential 1  
27.  Transmission 1  
Shock Fluid    
28.  Shocks 4  

This tech tip was originally printed in the July 2002 “A” Quail Call.

Bookmark the permalink. Both comments and trackbacks are currently closed.